Skip to content

DIY Wedding Shirt and Dress Origami Escort Cards

DIY Wedding Shirt and Dress Origami Escort Cards published on 2 Comments on DIY Wedding Shirt and Dress Origami Escort Cards

You cannot give a woman a budget and a year of lead time and not expect some papercraft all up in this piece. Thus the origami escort cards.

(There is also a tale of venue snafu and caboose-saving, but it must wait for another day.)

How to make some super bananas escort cards
Names have been changed to protect the innocent

The origami will fit just fine in place card holders. I knew I wanted to display mine vertically, since table space was limited.

Display Stand

So when our duplex-mates attempted to throw out a mirror frame, I was all like, “Nuh-uh, you are getting repurposed as heck.” Me and the groom picked out some soft green paint, and over the next couple of days I primed and painted the frame in the driveway, leaving plenty of distance from cars and using ample drop cloth to keep our landlords from murdering me.

Apparently I was too excited to take process photos. Be assured it was as gripping as spray-painting a wooden frame can be. Here is a photo of the finished product instead:

Low angles rule
Low angles rule

Knowing we had about 70 guests, I got my tape measure and made marks for twelve evenly-spaced rows. I figured I’d staple-gun ribbon in a grid and clip the escort cards to the ribbon with tiny clothespins.

Once I saw the grid and its space limitations, I realized each card couldn’t be more than two inches wide. Maybe they could be more vertical?

They’d end up looking something like shirts on a line.


Origami Escort Cards

I knew origami shirts existed. Maybe I could do dresses for the ladies? Is it OK to enforce a gender binary if it’s super cute?

I don’t know. But I decided to do it.

I used these common dollar-bill origami shirt instructions and these less common Inklings and Yarns dress directions derived from a video tutorial by How About Orange. The patterns turned out to be simple and pretty easy to pump out.

Seriously can't stop folding.




I ordered paper in these solid colors and these washi style patterned colors.

The trick was getting paper the right size. The shirt folds down much smaller than the dress. I ended up using 4″ x 4″ (10 cm x 10 cm) paper for the dress and 6″ x 3″ (15.24 cm x 7.62 cm) paper for the shirts.

Yes, I had to cut down many pieces of nice washi paper to get the right size for the dresses. No, I couldn’t figure anything to do with the excess.

With measuring tape for, you know, scale.

It took three or four hours of folding, which goes great with a season of Better Off Ted.


Using an extra-fine Sharpie pen, I wrote names on the front and the table numbers on the back. Even with the permanent marker, until the ink dried it was possible to smear them, so I had to take care and not rush. Also, your hand can tell when you’re trying to write carefully and will make you skip consonants at every opportunity.

I hung all the cards alphabetically by last name. Then I wrapped the frame in garbage bags and strapping tape until it was nice and secure. It made the journey to the wedding intact — unless I only think that because someone saved my bacon without my knowledge, which is very possible.


It has a certain zazz.
And this chair fit the bill just right to hold it

When I got to the reception and found that two clever guests launched a trend of wearing the escort cards as nametags!

Cropped to protect the innocent.
Fun as heck.

It was a rad bonus and a double hoot. I recommend it!

I just gave myself diabetes.

DIY Origami Wedding Favors with Candy

DIY Origami Wedding Favors with Candy published on

No, I am not done with the twee papercraft. Yes, I know it is getting a little wacky. But here are the origami wedding favors.

I just gave myself diabetes.
8-bit motif optional


I ordered three packs of Japanese Tant Origami Paper in blue and used all the pastel shades. Also I notice I did this in May of last year. It’s possible I had some excess excited energy to work off.


The container is the famous origami star box.

Born to fold, yo.

I used 6″ x 6″ (15.25 cm x 15.25 cm) paper.


I crimped the petals for general fanciness.


And I applied some glue stick to keep the petals stuck.

The Tags

Midi music not included
Small to encourage you to make your own.

I ordered the tags from They come pre-perforated with a little white string to tie them on. I ordered small cellophane bags from them, too.

The Candy

Exclamation points are always in fashion
Sassy phrases at your discretion

I went with custom-printed M&Ms. I poked around and figured the most cost-effective way to do this was to order 5 lbs. of blank white M&Ms from A Candy Store and 2 lbs. of multi-colored custom-printed M&Ms from the M&M website

Do place your orders like a month in advance, since they will take time to arrive and assemble.


The M&Ms come with a little measuring scoop. You should wash it before using, but don’t be like me and dry it in haste. You will end up with damp M&Ms and be quite unhappy with yourself.

It took 2 or 3 hours to put them together. Pretty simple!

Sandalwood scented fans also not included.
Rings not included.

Now go get ’em!

So snugglesome!

DIY Wedding Papercraft Programs

DIY Wedding Papercraft Programs published on

Again, you cannot give a woman a to-do list and a year of lead time and not expect some wedding papercraft programs up in this piece.

Names blurrified to protect the innocent

I considered a lot of options for programs. Fans are cool, and seed fans are super cool. But I couldn’t justify the cost and materials of printing them — not to mention we were expecting only 70 guests, which is a scant number for a formal print job.

Somewhere — and for the life of me I can’t track it down again — I saw someone post about a rotating dial program. This person’s even had a pocket for bubbles. I’m going to keep trying to find it so I can credit it. Holler if you know what I’m talking about.

Anyway, The dial thing was charming as heck and seemed like a fun thing to do for a ceremony with a small wedding party.

I put the names of party members (parents, officiant, maid of honor, best man, musician, etc.) radially on one side. On the other I put the actual program, a drawing and an expression of gratitude to all our guests.


I worked up everything in Illustrator, taking madd advantage of its rotation and font tools. I worked from the same template for both dials and prayed I got everything right so the circles would all match up. I must have been careful enough, because they did.


I got almost all our printing (save-the-dates, invitations, RSVPs) done by Overnight Prints, and the programs were no exception. (Overnight Prints asked me to share their current coupon codes, which you might enjoy.) I ordered the pieces as postcards, which is possibly not the best choice for everyone. The paper is VERY hardy and tough to cut with a X-ACTO. Even with scissors, it was hard to get a smooth edge on the circles, but they still turned out all right and I don’t think anyone noticed, or at least I never heard, “HEY, THESE CIRCLES AREN’T VERY SMOOTH.”

However printing the pieces as postcards meant the resulting programs were VERY sturdy, which was great. If you aren’t sure what kind of printing or paper you want to go with, I encourage you to experiment to see what gives you a nice, secure dial but is still easy to cut.

Use caution with box cutters or XActo knives or whatever you got
Cat optional


I cut the straight lines and dial cut-out with an X-ACTO and mat — the rest with scissors that probably could have been sharper.

If you’d rather see these instructions as a video, this (this Papercraft Poseability video is pretty hand.

Cut the little pieces first
Like so. Note the round hole in the center of the dial.
Cut out a rotor gizmo and the button like so. I printed the outline for these just off to one side of the back of the program — but, uh, didn’t take a picture of that side. My bad. But note the center circle of the gizmo is the same size as the hole in the dial.
Fold up two opposing petals of the gizmo and apply glue stick (mine was purple)
Glue those two opposite petals to the center of the face with party names
Crimp the remaining two loose petals
Squeeze these through the hole in the dial
Flatten it out
Like so
Apply glue stick
Stick on the button. This holds the dial open and looks polished

It took about an hour to do ten of these.

I recommend seasons of Archer for this also.


I a-a-a-almost bought a bunch of little baskets for all the weddings holding-twee-items needs. But then I was like, dude, I don’t want to have to sweat collecting these all later (little did I know certain caboose-savers would sweat it for me, but, again, that is a story for another day.)

So snugglesome!
Cardboard + wrapping paper = good times

Naturally the boxes the postcards arrived packed in from Overnight Prints were just the right size for holding the stack of programs. So I just took my roll of nice wedding wrapping paper and wrapped that cardboard box! A little tissue paper and the programs were nice and stable and vertical and ready for plucking.

And guests could still fan themselves if they really got the notion.

Primary Sidebar